CISCO SYSTEMS CATALYST 2960 PLUS 24 10/100

CISCO SYSTEMS CATALYST 2960 PLUS 24 10/100

D-LINK 24-Port Fast Ethernet Switch

D-LINK 24-Port Fast Ethernet Switch

NETGEAR GS324 24-Port Gigabit Ethernet Unmanaged Switch lüfterlos mit Wand- und

NETGEAR GS324 24-Port Gigabit Ethernet Unmanaged Switch lüfterlos mit Wand- und

CISCO SYSTEMS CATALYST 2960 PLUS 24 10/100

642,06 €
Verfügbarkeit: Auf Lager
SKU
PCS1828290
GerätetypSwitch - 24 Anschlüsse - managed
GehäusetypAn Rack montierbar 1U
UntertypFast Ethernet
Ports24 x 10/100 (PoE) + 2 x Kombi-Gigabit-SFP
Power Over Ethernet (PoE)PoE
PoE-Budget370 W
LeistungSwitching-Kapazität: 16 Gbit/s ¦ Weiterleitungsleistung (Paketgröße 64 Byte): 6,5 Mpps
KapazitätAktive VLANs: 64
Jumbo-Rahmenunterstützung9018 Byte
RemoteverwaltungsprotokollSNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, CLI
AuthentifizierungsmethodeRADIUS, TACACS+
LeistungsmerkmaleVollduplex-fähig, BOOTP-Unterstützung, ARP-Unterstützung, VLAN-Unterstützung, Syslog-Unterstützung, DiffServ-Unterstützung, IPv6-Unterstützung, Spanning Tree Protocol (STP)-Unterstützung, Rapid Spanning Tree Protocol (RSTP)-Unterstützung, Multiple Spanning Tree Protocol (MSTP)-Unterstützung, DHCP-Snooping, Unterstützung für Port Aggregation Protocol (PAgP), Unterstützung für Trivial File Transfer Protocol (TFTP), Quality of Service (QoS), Dynamic ARP Inspection (DAI), Cisco EnergyWise-Technologie, Shaped Round Robin (SRR), LLDP-Support, DHCP-Relais, Link Aggregation Control Protocol (LACP), MAC Address Notification, Management Information Base (MIB), Class of Service (CoS), DiffServ Code Point (DSCP)--Unterstützung
ProduktzertifizierungenIEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP)
RAM128 MB
Flash-Speicher64 MB
StatusanzeigerAnschluß-Übertragungsgeschwindigkeit, Anschluß-Duplexmodus, System, Status, RPS (redundantes Netzteil), PoE
Schnittstellen24 x 100Base-TX RJ-45 PoE - 15.4 W ¦ 2 x SFP Uplink ¦ 2 x 1000Base-T RJ-45 Uplink
StromversorgungsgerätInternes Netzteil
Erforderliche NetzspannungWechselstrom 120/230 V (50/60 Hz)
Leistungsaufnahme im Betrieb35 Watt
BesonderheitenAnschluss für Redundant Power System (RPS)
MTBF381,000 Stunden
ProduktzertifizierungenCISPR 22 Klasse A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Klasse A, AS/NZS 60950-1, ICES-003 Klasse A, FCC CFR47 Part 15, UL 60950-1 Second Edition, Directive 2004/108/EC, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, Directive 2006/95/EC, VCCI Class A, KN24, KN22 Class A, RoHS 2011/65/EU, EN 300386
Software inbegriffenCisco IOS LAN Lite
Breite45 cm
Tiefe33.2 cm
Höhe4.4 cm
Gewicht5.4 kg
Service und SupportBegrenzte Garantie - Vorabaustausch defekter Komponenten - Lebensdauer - Reaktionszeit: am nächsten Arbeitstag ¦ Technischer Support - Consulting - 90 Tage
Min Betriebstemperatur-5 °C
Max. Betriebstemperatur40 °C
Zulässige Luftfeuchtigkeit im Betrieb10 - 95% (nicht kondensierend)
Min. Lagertemperatur-25 °C
Max. Lagertemperatur70 °C
Zulässige Luftfeuchtigkeit bei Lagerung10 - 95% (nicht kondensierend)